Used Machine Tools in Greater Poland, Poland

Balestrini micron oscillating drill

• Manufacturer: Balestrini

Table height adjustment: 120 mm | Table angle adjustment: in the range of 0-20 degrees | Oscillation regulation: with a numerical indicator | Maximum oscillation stroke: 145mm | Spindle drive motor: 2,2 KW | Osc...

BLUM Procer hinge drill

• Manufacturer: Blum

BLUM Procenter Hinge Drilling Machine Manufacturer: Blum Type: Pro-Center Year of Manufacture: 2005 Drilling and inserting hardware vertically and horizontally using various drilling heads, 17-spindle drilling he...

Robland circular saw with carriage and milling machine

• Manufacturer: Robland

Robland saw and milling machine, two 2.2 kW, 380V motors, adjustable saw blade up and down and at an angle of 0-45°, milling spindle diameter 30 mm, two spindle speeds: 3000 and 6000 rpm, machine tested and ready...

SCM Nova TI 105 milling machine

• Manufacturer: SCM / SCMI

Technical data: The length of the trolley: 120 cm | Shank size: 30 mm | Replaceable pin: Yes | Speed regulation: Yes, 4 speeds | Engine size: 7 KW

Hettich hinge drill

• Manufacturer: Hettich

Hettich hinge drilling machine 380V power supply drilling vertically and horizontally 3 drilling heads rotating heads, parallel position - row of holes or perpendicular position stroke of drilling head pneumatic ...

Zangheri multi-spindle drilling machine 2 heads

Zangheri MULTI-SPINDLE DRILLING MACHINE, 2 x bottom drilling heads with 21 spindles each, maximum vertical head spacing 800mm, drills mounted with quick-release couplings, left/right spindles, spindle spacing 32m...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Holztech s320 sliding table saw

Holztech S320 Sliding Table Saw 5.5kW main motor, 3 speeds, 350mm maximum blade, 0.75kW scoring unit, 120mm, 320cm carriage, right-hand culage, manually adjustable up to 1230mm, 0-45° tilt, manually adjustable, u...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...