Used Homogenizers

Polytron Homogenizers (Lot of Two)

• Manufacturer: Polytron

Used Polytron Homogenizers (Lot of Two)

Qsonica Q55 Homogenizer

• Manufacturer: Qsonica

The Q55 Sonicator® is a compact and cost-effective ultrasonic processor that will occupy less bench space than any unit on the market. It may be small and simple, but you still get the same renowned Sonicator per...

Bertin Instruments Minilys Homogenizer

Especially designed for low throughput laboratory workflows, the Minilys personal tissue homogenizer homogenizes three samples simultaneously in 0.5mL or 2mL tubes and one sample in 7 ml tubes. Capacity: 1 to 3 x...

Microfluidics LM10 Microfluidizer Processor Homogenizer

• Manufacturer: Microfluidics

This pneumatically driven Microfluidizer processor, with its modern user interface, is designed for the budget-conscious researcher working with small samples. The LM10 efficiently converts fluid pressure into sh...

Benchmark Scientific BeadBug D1030 Homogenizer

• Manufacturer: Benchmark

Dimensions: 6.9: x 8.3″ x 5.3″ Speed range: 2800 to 4000rpm | Max. capacity: 3 x 2.0mL | Timer: 3 sec. to 3 min. | Operating temp. range: +4C to +65C | Weight: 5lbs | Electrical: 115V

Fryma Mill Colloid MZ-110

• Manufacturer: Fryma
• Model: MZ

Fryma stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials and application. Equipped with 17-1/2" ID x 19" Deep stainless steel, connic...

Fryma Mill Colloid MZ80A

• Manufacturer: Fryma
• Model: MZ-80

Fryma, Model MZ-80/A, stainless steel, toothed colloid mill with production rates from 100 to 1000 liters of product per hour – depending on materials and application. Equipped with 12½" OD x 11" Deep stainless s...

Fryma Mill Colloid MZ80

• Manufacturer: Fryma
• Model: MZ-80

Fryma, Model MZ-80, stainless steel, toothed colloid mill with production rates from 100 to 1000 liters of product per hour – depending on materials and application. Equipped with 12½" OD x 11" Deep stainless ste...

Fryma Mill Colloid MZ-110

• Manufacturer: Fryma
• Model: MZ

Fryma Model MZ110, stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials, application and machine configuration. Equipped with 18" ID x ...

Microfluidics M-110P Microfluidizer

• Manufacturer: Microfluidics
• Model: M110P

Microfluidics M110P Laboratory Microfluidizer Processor System High Shear Fluids Processing used

Qiagen TissueRuptor II 9002755 Tissue Homogenizer

• Manufacturer: Qiagen

The QIAGEN TissueRuptor II is a compact rotor-stator homogenizer engineered for consistent and efficient disruption of biological samples such as tissues, cells, or viscous suspensions. It supports reproducible p...